Hey Burlington, Shelburne, Charlotte, South Burlington, Williston and all the rest. Here’s a shout out on helpful low-tech ways to save on energy bills for the coming winter.
1. Check your insulation. Filling in gaps and cracks, especially in the attic, will keep your house warmer this winter.
2. Don’t forget the basement. Check where pipes and utilities go to the outside that they are properly sealed/caulked.
3. Avoid fiberglass insulation. Wrap pipes with a foam insulation. For the attic, add dense packed cellulose to a depth of about 12 inches to fill in any nooks and crannies.
4. Cover attic fan and ceiling stair hatch. Be sure to cover your whole house fan with a proper cover. Also, get a an insulated cover to put above the drop down stair or opening to insulate any openings.
5. Seal duct joints and pipes. If you have a forced hot air heating system be sure your duct work is sealed properly at all joints. Use caulk or a non combustible high temperature sealant in the appropriate places.
6. Plug your fireplace and close the flue. ‘Nuff said.
7. Remove or cover air conditioners.
8. Seal windows and doors. Install weather stripping to prevent drafts. In addition, locking windows seals them and keeps cold air out. For doors, a rubber door sweep can be installed at the bottom to prevent drafts. For $10 to $20, a draft dodger will also keep the cold air out.
9. Keep furnaces clean. Have your home fuel provider service your furnace. Dirt is a major culprit which can increase energy consumption by 25% or more.
10. Get an energy audit. Contact the Energy Star program at www.EnergyStar.gov to provide assistance.
1 comment:
How To Reduce Your Heating Bills This Winter
Imagine leaving a window open all winter long -- the heat loss, cold drafts and wasted energy! If your home has a folding attic stair, a whole house fan or AC Return, a fireplace or a clothes dryer, that may be just what is occurring in your home every day.
These often overlooked sources of heat loss and air leakage can cause heat to pour out and the cold outside air to rush in -- costing you higher heating bills.
Air leaks are the largest source of heating and cooling loss in the home. Air leaks occur through the small cracks around doors, windows, pipes, etc. Most homeowners are well aware of the benefits caulk and weatherstripping provide to minimize heat loss and cold drafts.
But what can you do about the four largest “holes” in your home -- the folding attic stair, the whole house fan or AC return, the fireplace, and the clothes dryer? Here are some tips and techniques that can easily, quickly and inexpensively seal and insulate these holes.
Attic Stairs
When attic stairs are installed, a large hole (approximately 10 square feet) is created in your ceiling. The ceiling and insulation that were there have to be removed, leaving only a thin, unsealed, sheet of plywood.
Your attic space is ventilated directly to the outdoors. In the winter, the attic space can be very cold, and in the summer it can be very hot. And what is separating your conditioned house from your unconditioned attic? That thin sheet of plywood.
Often a gap can be observed around the perimeter of the door. Try this yourself: at night, turn on the attic light and shut the attic stairway door -- do you see any light coming through? These are gaps add up to a large opening where your heated/cooled air leaks out 24 hours a day. This is like leaving a window open all year round.
An easy, low-cost solution to this problem is to add an attic stair cover. An attic stair cover provides an air seal, reducing the air leaks. Add the desired amount of insulation over the cover to restore the insulation removed from the ceiling.
Whole House Fans and AC Returns
Much like attic stairs above, when whole house fans are installed, a large hole (up to 16 square feet or larger) is created in your ceiling. The ceiling and insulation that were there have to be removed, leaving only leaky ceiling shutter between the house and the outdoors.
An easy, low-cost solution to this problem is to add a whole house fan cover. Installed from the attic side, the whole house fan cover is invisible. Cover the fan to reduce heating and air-conditioning loss, remove it when use of the fan is desired.
If attic access is inconvenient, or for AC returns, a ceiling shutter cover is another option for reducing heat loss through the ceiling shutter and AC return. Made from R-8, textured, thin, white flexible insulation, and installed from the house side over the ceiling shutter with Velcro, a whole house fan shutter cover is easily installed and removed.
Fireplaces
Sixty-five percent, or approximately 100 million homes, in North America are constructed with wood or gas burning fireplaces. Unfortunately there are negative side effects that the fireplace brings to a home especially during the winter home-heating season. Fireplaces are energy losers.
Researchers have studied this to determine the amount of heat loss through a fireplace, and the results are amazing. One research study showed that an open damper on an unused fireplace in a well-insulated house can raise overall heating-energy consumption by 30 percent.
A recent study showed that for many consumers, their heating bills may be more than $500 higher per winter due to the air leakage and wasted energy caused by fireplaces.
Why does a home with a fireplace have higher heating bills? Hot air rises. Your heated air leaks out any exit it can find, and when warm heated air is drawn out of your home, cold outside air is drawn in to make up for it. The fireplace is like a giant straw sucking the heated air from your house.
An easy, low-cost solution to this problem is to add a fireplace draftstopper. Available from Battic Door, a company known for their energy conservation products, a fireplace draftstopper is an inflatable pillow that seals the damper, eliminating any air leaks. The pillow is removed whenever the fireplace is used, then reinserted after.
Clothes Dryer Exhaust Ducts
In many homes, the room with the clothes dryer is the coldest room in the house. Your clothes dryer is connected to an exhaust duct that is open to the outdoors. In the winter, cold air leaks in through the duct, through your dryer and into your house.
Dryer vents use a sheet-metal flapper to try to reduce this air leakage. This is very primitive technology that does not provide a positive seal to stop the air leakage. Compounding the problem is that over time, lint clogs the flapper valve causing it to stay open.
An easy, low-cost solution to this problem is to add a dryer vent seal. This will reduce unwanted air infiltration, and keep out pests, bees and rodents as well. The vent will remain closed unless the dryer is in use. When the dryer is in use, a floating shuttle rises to allow warm air, lint and moisture to escape.
If your home has a folding attic stair, a whole house fan, an AC return, a fireplace, and/or a clothes dryer, you can easily, quickly and inexpensively seal and insulate these holes. At Battic Door Energy Conservation Products, we have developed solutions to these and other energy-conservation related issues.
For more information on Battic Door’s energy conservation solutions and products, visit www.batticdoor.com or send a S.A.S.E. to P.O. Box 15, Mansfield, MA 02048.
Mark D. Tyrol is a Professional Engineer specializing in cause and origin of construction defects. He developed several residential energy conservation products including an attic stair cover and a fireplace draftstopper. To learn more visit www.batticdoor.com
Post a Comment